MicroNet Technology SP5054A/S, SP5052A/S pause, Parameter Usages, Prefix drop/insert information

	Gateway will drop prefix number on incoming call.
insert	set which digit to insert on incoming call.

2.16[pause]

Pause function allows users define a prefix for FXO, it usually apply to one-stage-dialing. For example, the FXO port is connect to a PBX, when an incoming call from IP side, users will hear a dial tone from PBX. If they want to dial to a PSTN, they must press a special code and wait 1~2 seconds for the PSTN dial tone. But in one-stage-dialing application, the FXO will not wait for the dial tone and it will dial immediately. Now user can define a special prefix, so if FXO detect the prefix, it will wait a moment then keep dialing.

---------------------------------------------------------------

usr/config$ pause

Prefix drop/insert information and configuration Usage:

pause -add [prefix number][delay number] pause -delete index

pause -modify index [prefix number][drop number][insert number]

pause -print	Prefix drop/insert information.
prefix	The prefix of dialed number.
delay	delay time(second).
Example:
pause -add prefix 100 delay 1

pause -delete 1

pause -modify 1 prefix 101 delay 0

---------------------------------------------------------------

Parameter Usages:

-add	add a new record to pause function. When adding a
	record, users have to specify prefix and delay seconds to
	complete the command.
-delete	delete a record to pause function.
-print	print out current contents of Pause function.

38