MicroNet Technology SP5054A/S, SP5052A/S Analizing!! Please wait a moment Frequency 1 Frequency 2

....................................................................................................

..........

Analizing!! Please wait a moment...

Frequency 1 : 620

Frequency 2 : 474

0.25sec on 0.25sec off

usr/config$

-greeting	record the greeting file
-askpin	record the askpin file
-tone	analyze the tone from PSTN or PABX

The Procedures of recording the disconnect tone

Micronet FXO/FXSO Gateway in the latest version use the "record -tone" command to analyze the disconnect tone. Please prepare connection as the figure shown.

Note: Please connect extension (or PSTN) line to the second FXO port (L2) of FXO gateway that takes charge of tone detection. For FXS/FXO gateway, however, the first FXO port (LINE1) is in charge.

Procedure:

(1). Prepare Telnet or Console connection, and login the system.

(2). Place command "record -tone", and press "r"...

(3). Make a call from handset (Ext.8509) to the Ext.8401 into the FXO port.

(4). After greeting tone, hang up the call from Ext.8509

(5). Press R key and Enter to start analysis

48