MicroNet Technology SP5054A/S, SP5052A/S user manual SIP Config, z z z z

z

z

z

z

connection.

PPPoE IP Address: In the PPPoE mode, this table will show the ip address that this unit gets from the ISP.

PPPoE Destination: In the PPPoE mode, this table will show the default gateway address that this unit gets from the ISP.

PPPoE DNS primary: In the PPPoE mode, this table will show the DNS ip address that this unit gets from the ISP.

After Remote Host Disconnection: This unit will reboot and re-connect to the ISP

1.2 SIP Config

This WEB page will help user to configure the information about the dial mode, GK information and some TCP/IP port for the communication. Please get more info about this configuration from the below detail descriptions. (See figure 3.5)

Parameter Description:

zMode – Pick up the calling mode for this gateway.

6