MicroNet Technology SP5052A/S, SP5054A/S user manual Route, Example Call out from FXO Line

Example : Call out from FXO Line

Proxy Mode Usage: Set gateway under proxy mode. Create a Hotline table with “line ” command. ---------------------------------------------------------------

usr/config$ line - config 1 hotline 1001

---------------------------------------------------------------

In this example means: if user picks up phone set of FXO Line1, gateway will automatically dial out “1001”.

P2P Mode Usage: Set gateway under P2P mode. Create phone book table with “pbook ” command. Create a Hotline table with “line ” command.

---------------------------------------------------------------

usr/config$ pbook - add name micronet ip 10.1.1.1 e164 1001 usr/config$ line - config 1 hotline 1001

---------------------------------------------------------------

In this example means: if user dials into FXO Line1, gateway will automatically dial out IP address of “1001”.

2.14[route]

Routing table for your calls

---------------------------------------------------------------

usr/config$ route

Routing table information and configuration Usage:

route -add [prefix number][dst number][e164 number] [min number][max number][hunt number]

route -delete index

route -modify index [prefix number][dst number][e164 number] [min number][max number][hunt number]

route -ip [dst number][e164 number] route -fxo [dst number][e164 number]

route -print	Routing table information.
prefix		The prefix of dialed number.
dst		Destination port(FXO:1/IP:2).
e164		Destination e164 number(when destination is FXO).
min		Min digits.(0 ~ 255)
max		Max digits.(0 ~ 255)
hunt		Hunt method for busy forward

35