MicroNet Technology SP5054A/S, SP5052A/S user manual Auth, Setmac

1.Loginname can be only 'root' or 'administrator'

2.passwd -clean will clear all passwd stored in flash, please use it with care.

Example:

passwd -set root Your_Passwd_Setting

2.26[auth]

---------------------------------------------------------------

usr/config$ auth

Root control what command administrator can use. Usage:

auth -print Display auth switch configuration.

Use item name to do config name (0=Disable, 1=Enabled).

Example: auth -ifaddr 1

2.27[setmac]

To set mac address please key in command setmac:(when key in MAC address ,press enter each time after key in two characters). Please get the MAC address from the bottom of your FXO VOIP units.

-------------------------------------------------------------------------------------------------

usr/config$ setmac

- enter mac address (xxxxxxxxxxxx):

0001a8002baa

-the mac address is 00 01 a8 00 2b aa

-if mac address is correct,please press 'y' to setup configuration,else press 'n' to continue

y

-------------------------------------------------------------------------------------------------

56