SATO GT 424e, GT408, GT 410 manual Lan Interface Setup Mode, 7, LAN Interface Setup Mode

Unit 4: Operation

LAN INTERFACE SETUP MODE

This chapter provides the programming sequences required for LAN and mini-LAN interface setup. Use the keys of the printer’s operator panel to select and enter the required options.

							POWER
INTERFACE CARD		OFFLINE
SETTING			000000
YES	NO					ONLINE		QTY: 000000
		INTERFACE CARD
	Select Yes.
No + ENTER		SETTING				LINE		ENTER
	Press ENTER
		CARD1		CARD2
		CANCEL		ENTER
STATUS5 Selected?		LAN
	Yes / No
		CONFIGURATION
ENTER						ENTER		CANCEL
			CARD	LCD
ITEM NO CHECK						Press FUNCTIONanytime
ENABLE	DISABLE					during sequence returns to
			Card Selected?			Normal Mode.
			Yes / No
CANCEL	ENTER
BCC CHECK		LAN card detected?			IP ADDRESS
ENABLE	DISABLE	Yes / No			0.	0.	0.	0
ENTER	CANCEL				ENTER			CANCEL
		WIRELESS MODE
		802.11 Ad Hoc			SUBNET MASK
		Ad Hoc			0.	0.	0.	0
		Infrastructure
STATUS4 Selected?		CANCEL	ENTER		CANCEL			ENTER
Yes / No
		SSID			GATEWAY ADDRESS
STATUS		1234567890ABCDEF			0.	0.	0.	0
REPLY TIMING
ENG	CYCLE	ENTER	CANCEL		ENTER			CANCEL
ENTER	CANCEL	CHANNEL			PORT NUMBER 1
			01
DATA PORT								01024
CARD1	CARD2	CANCEL	ENTER
					CANCEL			ENTER
CANCEL	ENTER
		PROTOCOL			PORT NUMBER 2
STATUS PORT		STATUS3						01024
ENABLE	DISABLE	STATUS4
		STATUS5			ENTER			CANCEL
ENTER	CANCEL
IGNORE CR/LF		IGNORE CAN/DLE			PORT NUMBER 3
		YES	NO					01024
YES	NO
CANCEL	ENTER	CANCEL	ENTER		CANCEL			ENTER

Figure 4-7, LAN Interface Setup Mode

SATO GT4xxe Series Operator Manual PN 9001138A Page 4-8