SATO GT408, GT 424e, GT 410 manual Item Number error

Unit 5: Troubleshooting

ERROR SIGNALS

Error No.	LCD Display		Description
		BCC Check error
17		Cause:	BCC attached to sending data (for an item) is different.
		Remedy:	Ensure the data communication settings are correct.
		Alarm sound:	Three short beeps.
		External signal:	Machine error.
		Item Number error
		Cause:	The sequence number of present and past print data (for
18			an item) does not match.
		Remedy:	Ensure data communication settings are correct.
		Alarm sound:	Three short beeps.
		External signal:	Machine error.
		Winding Full error
		Cause(s):	1. The label rewinder needs to be emptied
19			2. The sensor is malfunctioning
		Remedy:	Remove the wound label.
		Alarm sound:	Three short beeps
		External signal:	Machine error
		Head Density error
		Cause(s):	1. The print head is not correctly installed.
20			2. An unsupported print head is installed.
		Remedy:	Ensure the print head is suitable for use with this printer
			and that it is properly installed.
		Alarm sound:	Three short beeps.
		External signal:	No output.
		Kanji ROM error
21		Cause:	Invalid Kanji data has been read from the Kanji ROM
		Remedy:	Ensure the Kanji ROM has been properly installed.
		Alarm sound:	Three short beeps
		External signal:	Machine error

SATO GT4xxe Series Operator Manual PN 9001138A Page 5-5