Parallel Port, Floppy Disk Controller | Micronics W6-LI specs

Chapter 4: The BIOS Setup Utility

Parallel Port

The parallel port may be configured using the following options: Disabled (No configuration), Enabled (User con- figuration), Auto (BIOS configuration) and PnP O/S (O/S configuration).

Floppy Disk Controller

The selection allows you to enable or disable the floppy disk controller.

Integrated PCI IDE

Enables or disables the integrated Local Bus IDE adapter. The IDE controller may be set for Primary, Both (default) or Disabled.

Integrated SCSI

Enable or disable the integrated PCI SCSI interface. The default setting is Enabled.

Integrated Sound

Enables or disables the integrated sound interface. The default setting is Enabled.

Use MP Specification

This selection allows you to select the 1.1 (default) or 1.4 multiprocessor specification.

Plug & Play O/S

This selection, when set to Yes, allows the system to work with a Plug and Play operating system such as Windows 95. The default setting is No.

W6-LI System Board Manual

41

Image 43

Micronics W6-LI manual Parallel Port, Floppy Disk Controller, Integrated PCI IDE, Integrated Scsi, Integrated Sound

Contents

PCI/ISA Copyright Notices Table of Contents Installing Device Drivers Glossary Index List of Figures Introduction Features IBM Software Compatibility Common Names Before You Begin Installing the W6-LI Quick Installation Power-Up Screen Static Electricity Configuring the W6-LI W6-LI System Board W6-LI System Board CPU Jumper Settings Function Settings Disable Scsi 9B Case & Peripheral Connections Introduction Installing the W6-LI ATX chassis with standard hardware System Memory Installing the W6-LI Memory Configurations Memory Bank Bank 256MB Removing DIMMs Installing the DIMMs Installing a CPU Installing a PCI Card Installing a PCI Peripheral Card Installing an ISA Card Installing an ISA Peripheral Card Installing a CD-ROM Drive W6-LI Sound Option Connecting Sound Devices Line Out Game PortLine Connecting the Scsi Option Setup Bios Setup Utility Power-Up Screen Setting the Main Screen Running the Setup Procedure Numlock Video BiosSystem Time and Date Diskette a or B System Memory System BiosExtended Memory Multiple-Sector Transfers Type Smart Monitoring LBA Mode ControlTransfer Mode Bit I/O Serial Port a Setting the Advanced ScreenSerial Port B Integrated PCI IDE Use MP SpecificationParallel Port Floppy Disk Controller Large Disk Access Mode Reset Configuration DataPCI Configuration Secured Setup Configuration Security Screen Set Supervisor Password Supervisor Password Submenu Set User Password Fixed Disk Boot Sector Password on BootDiskette Access Power Management Power Screen Auto Suspend Timeout Standby Timeout Post Errors Boot ScreenHard Drive Boot Order Setup Prompt Floppy Check Exit Screen TheBIOSSetupUtility W6-LI System Board Manual Installing the Sound Drivers Installing Device Drivers Installing the Scsi Drivers Bios Specifications Scsi Environmental Specifications Battery Disposal Technical Support Support and Information Services Service Hours Country Appendix a Technical Information W6-LI System Board Manual Post Messages Message Possible Cause Solution Cmos Beep and Post Codes Get in Post Reg Code One beep Heads Write Sectors Size Hard Disk Drive Types Type Cylinders Heads Write Precomp Sectors Size 823 512 Appendix E Updating the System Bios Updating the System BiosPage Limited Warranty Non-Warranty Service FCC Statement DeclarationofConformity Glossary Internal Cache Cache which is built into the CPU. See Cache Small Computer System Interface Glossary ATX IndexPage