Micronics W6-LI manual Power-Up Screen

Chapter 1: Quick Installation

Figure 1-1: Power-Up Screen

9.Set the time and date. Adjust the BIOS settings to match your configuration. If installing an IDE drive, select the IDE device you wish to configure. Press ENTER with Autotype Fixed Disk selected and the BIOS will automatically configure the drive for you (refer to Chapter 4).

10.After you have configured the Main Setup menu, make any desired setting configurations in the Ad- vanced and Security menu. When finished, go to the exit screen, select “Save Changes and Exit” and you are finished with the BIOS configuration (see Chap- ter 4).

11.Install your IDE CD-ROM drive and its device drivers (optional). Refer to Chapter 3.

12.Install the sound controller device drivers (optional). Refer to Chapter 5.

13.Install the SCSI device drivers (optional). Refer to Chapter 5.

10 W6-LI System Board Manual