Hardware Installation

2.4 Jumper Settings for Clearing CMOS Data

Jumper JP1

Clear CMOS Data

If, for some reason, the CMOS data becomes corrupted, the system can be reconfigured with the default values stored in the ROM BIOS. To load the default values, power off your system and unplug the power cord. If you are using an AT power

supply, you do not need to unplug the power cord. Set JP1

pins 1 and 2 to On. Wait for a few seconds and set JP1 back

to its default setting, pins 2 and 3 On.You may now plug the power cord and power-on your system.

3 2 13 2 1

1-2 On:

2-3 On: Normal

Clear CMOS Data

(default)

2

19

Page 19
Image 19
Microsoft G7VP2 manual Jumper Settings for Clearing Cmos Data, Jumper JP1 Clear Cmos Data