Award BIOS Setup Utility
PCI IRQ Actived By
This category is used to set the method by which the PCI bus recognizes that an IRQ service is being requested by a device. Under all circumstances, you should retain the default configuration unless a different setting is needed.
Assign IRQ for VGA
When Enabled, the system automatically assigns an IRQ for the VGA card installed.Your VGA card will need an IRQ only when using the video capture function of the card. If you are not using this function and a new device requires an IRQ, you can set this function to Disabled. The IRQ (previously occupied by the VGA card) will be available for your new device.
Note:
When Disabled, a “Yellow” mark will appear in Windows® 95/98’s Device Manager.
PCI Slot 1 Use IRQ and PCI Slot 2 Use IRQ
By default, an IRQ will automatically be assigned to each PCI slot. You may manually assign an IRQ to these slots by selecting one of the available options.
3
49
