Frequently asked questions
What if "F" and a number appear in the oven display?
"F3": The roast probe is faulty. | Remove the probe from its socket and the code |
| will disappear. |
"F6": The oven has | This is a safety feature to protect the oven if it has |
automatically shut off. | been operated for too long. The oven can be |
| reset by turning the program selector to "0" and |
| then restarting the program. |
"F7" The cooling fan has | If "F7", "F8", "F9" or any other unexplained fault |
stopped turning. | codes are displayed, please call Technical |
"F8" The convection fan has | Service. |
| |
stopped. |
|
"F9" The maximum |
|
temperature of the oven has |
|
been exceeded, and the oven |
|
has shut off. As soon as the |
|
temperature has fallen to an |
|
acceptable level, the fault |
|
code will disappear. The oven |
|
will turn itself on again. |
|
"F13": The door lock for the | Turn the program selector to the "0" position and |
Self Clean program does not | then to "Light". |
work. | After 60 seconds the error message will go out |
| and "PYRO" and the symbol "p" will light up in the |
| display. |
| After 30 seconds the symbol "p" will flash. |
| Turn the program selector to "0". The oven is |
| ready to operate again. |
| If you still cannot operate the oven or if this error |
| message occurs again contact Technical |
| Service. |
"F14": The door lock for the | If an attempt was made to open the door before |
Self Clean program does not | the "p" symbol started flashing to indicate the end |
open. | of the cleaning process push the door shut and |
| wait until the "p" symbol starts flashing in the |
| display. This releases the lock and the oven door |
| can now be opened. |
| If "F14" still appears in the display there could be |
| a technical fault requiring a service call. Contact |
| Technical Service. |
53