Miller Electric TM-353E manual Selecting a Location, Dimensions And Weights

3-4. Selecting A Location

Movement

Location And Airflow

3

5

1

OR

2

6

4

18 in (460 mm)

1Lifting Eye

2Lifting Forks

Use lifting eye or lifting forks to move unit.

If using lifting forks, extend forks beyond opposite side of unit.

3Rating Label (Non CE Models Only)

4Rating Label (CE Models Only, See Section 2-2)

Use rating label to determine input power needs. CE label located on rear panel.

5Plate Label (CE Models Only)

6Line Disconnect Device

Locate unit near correct input pow- er supply.

YSpecial installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.

18 in (460 mm)

ST-800 402 / ST-117 264-F

3-5. Dimensions And Weights

A

B

C

D

Front

				Dimensions
			Height	30-3/4 in	(781 mm)
			Width	19-3/4 in	(502 mm)
E
			Length	27-1/2 in	(698 mm)
			A	27 in (686 mm)
			B	26 in (661 mm)
	F		C	25-1/4 in	(642 mm)
			D	1-1/2 in	(38 mm)
		G
			E	1-1/8 (29 mm)
			F	17-7/8 (454 mm)
			G	19-1/4 (489 mm)
			H	1/2 in (13 mm) Dia

H 6 Holes		Weight
	ST-154 792-B
		355 lbs (161 kg)

TM-353 Page 8 Syncrowave 250