PLAYBACK MODE

COPYING IMAGES

Image files can be copied from one CompactFlash card to another. Up to 15MB of data can be trans- ferred. Every time the copy function is used, a new folder is automatically created for the image(s).

This frame – To copy the image currently displayed.

Marked frames – To copy single or multiple images. When selected, the frame-selection screen (p.

112)will appear; highlight the images to be copied with the yellow border and then press the up key of the controller to mark it with the check icon. To deselect an image, highlight the selected thumbnail and press the down key; the check icon will disappear. Continue until all the images are marked. Press the controller to continue, or press the menu button to cancel the operation and return to the playback menu.

If too many images have been selected, a warning will appear and the copy routine will be canceled. Divide the number of images into two or three batches.

When the controller is pressed, a screen with four messages will be displayed; the messages are highlighted as the copying pro- cedure is executed.

Play Copy

1Copying to camera memory.

2Please change CF card.

3Copying to CF card.

4Copying completed.

Enter

When the change-CF-card message is highlighted, remove the camera’s CompactFlash card and insert the card to which the image should be copied. Press the central button of the controller to continue.

120

Page 120
Image 120
Minolta 7i instruction manual Copying Images