126
SETUP MODE
EVF AND LCD MONITOR BRIGHTNESS
The brightness of the EVFand LCD monitor is set independently of each other. Brightness is con-
trolled in five levels from 1 (low) to 5 (high).As each setting is highlighted, the monitor will adjust
accordingly;the controller must be pressed to set the highlighted level. When the LCD brightness or
EVF brightness setting is selected, the corresponding monitor will activate automatically.
SHUTTER FX
An AF confirmation signal and shutter sound effect gives pos-
itive audio confirmation when pictures are being captured.
The sound effects can be turned off in the basic section of
the setup menu (p.124). Two shutter effects are available.
Signal 1 uses the AF signal from the Dynax/Maxxum 7, and
shutter sound from the Dynax/Maxxum 9 SLR.Signal 2 uses
an electronic AF signal with a mechanical shutter sound
taken from the legendary Minolta CLE.
AUDIO SIGNALS
Every time a button is pressed, an audio signal will give a positive confirmation of the operation.The
audio signals can be turned off in the basic section of the setup menu (p.124). The tone of the signal
can also be changed;signal 1 is electronic and signal 2 is mechanical.