80
RECORDING MODE
ELECTRONIC KEYBOARD
The electronic keyboard is used to enter text for imprinting data or for naming new folders.The key-
board automatically appears when text needs to be entered.
To enter text, sim-
ply use the four-
way keys of the
controller to high-
light the desired
character and then
press the central button
of the controller to enter it.
Entering the case key will switch
between upper and lower case;the
change is immediately displayed on
the keyboard.When complete, high-
light the enter key and press the
controller to enter the text and com-
plete the operation.To cancel the
operation, press the menu button.
To delete text, move the cursor into the text block at the top of the screen. Use the cursor to highlight
the character to be deleted.Press the down key; the delete key will be highlighted. Press the center
of the controller to delete the character.
To replace a character, repeat the previous procedure, but when the delete key is highlighted, use
the four-way keys to highlight the character to replace the one highlighted in the text box;press the
controller to replace the character.
Text block Delete key Case key
Enter key
Rec. Text input
select enter