139
When the camera is properly connected to the computer, a drive icon will appear.When using
Windows XP, the removable-disk window will open.If the computer does not recognize the camera,
disconnect the camera and restart the computer.Repeat the connection procedure above.
After using the four-way key of the controller to highlight the
USBoption in the USB section of the data-transfer menu,
press the the right key of the controller.
•“Enter”should appear on the right side of the screen.
Press the center of the controller to send a signal to the com-
puter to initiate the USB connection.
•A screen will appear to indicate the beginning of the connection
process.
•When the signal has been received by the computer, the
camera’s monitors will turn off.
6
7
Trans
USB
USB Enter
Initializing USB
connection