Minolta PCL6 user manual C.M. all count reset

A-14

3. E.C.M. (E.K.C.)

[2] E.C.M. all count reset

Use this function to reset the count for all E.C.M. counters.

ECM Setting Menu Screen ECM All Count Reset Screen

Appendix

C4027P221CA C4027P231CA

Procedure

1.Touch [4] E.C.M. function setting on the Key operator mode menu screen. Enter an 8-digit E.C.M. master key code, and then touch [OK] to display the E.C.M. setting menu screen.

NOTE:

If an invalid E.C.M. master key code is entered, continue by entering the valid 8-digit code.

2.Touch [2] E.C.M. all count reset. The Reset all E.C.M. counters screen will be displayed.

3.Touch [YES] to reset all counters to zero and to return to the E.C.M. setting menu screen.

Or touch [NO] to cancel. Touching [PREVIOUS SCREEN] will also cancel this function and return to the E.C.M. setting menu screen.

4.If other E.C.M. setting changes are required, touch the desired key from [1] to [3].

5.Touch [PREVIOUS SCREEN] to restore the Key operator mode menu screen.

6.If no further changes are required, touch [PREVIOUS SCREEN] to restore the basic screen for performing copy operations.