3. E.C.M. (E.K.C.)
How to access the ECM setting mode
Key Operator Mode Screen | ECM Master Key Code Screen |
C4027P219CA | C4027P220CA |
ECM Setting Menu Screen
C4027P221CA
Procedure
1.Touch “[4] E.C.M. function setting” on the Key operator mode menu screen. The Enter E.C.M. master code screen is displayed if a code is required.
2.Use the keypad on the touch screen to enter your
3.Select the desired E.C.M. function, and then make settings as required.
4.To exit the E.C.M. mode, touch [PREVIOUS SCREEN] on the E.C.M. setting menu screen, and then touch [PREVIOUS SCREEN] on the Key operator mode menu screen to restore the basic screen.
NOTE
Appendix
If an invalid E.C.M. master key code is entered, continue by entering the valid 8- digit code. The E.C.M. master key code can be set to less than 8 digits with the Memory switch setting of the Key Operator function.