Properties Settings Chapter 3

3-26

8. Overlay tab

(11)Shading

Specify the density of the characters. Setting range: 5% to 100%

(12)Angle

Specify the angle of the characters with respect to the paper.

• Angle

Default angle fixed by the driver.

 

Available settings: Horizontal, Diagonal, Vertical,

 

 

User Setting

• User Setting

If you select “User Setting” from the Angle list, you

 

can set any desired angle.

 

Setting range:

-180° to +180° (A – (minus)

 

 

value rotates the characters

 

 

clockwise, 0 leaves the characters

 

 

parallel to the paper, and a +

(plus) value rotates the characters counterclockwise.)

(13)Position

Specify the position at which you wish to print a watermark.

• Center

The watermark is printed in the center of the paper.

• User Setting

You can specify a position by entering numbers in the

 

Horizontal and Vertical boxes.

 

Setting values:

 

 

Horizontal

-999 to 999 points (in 1-point

 

 

steps)

 

Vertical

-999 to 999 points (in 1-point

 

 

steps)

 

 

(72 points = 1 inch)

TIPS

Specify the position from the center. The Horizontal positive direction is to the right, and the Vertical positive direction is upward.

You can view your settings in the Preview area (1).

Page 58
Image 58
Minolta PCL6 user manual Horizontal and Vertical boxes