Carefullyread through these rules for safe operation before hooking up the terminal.
PLACEMENTAND VENTILATION
Theunit has openings for ventilation that protect it from overheating.
• Avoid obstructing these openings, and do not place other equipment, including televisions, lamps,books or any other object, on
theunit. Do not place it in an enclosure such as a bookcase or equipment rack, unless the installation provides proper ventilation.
• Do not place the unit on a bed, sofa, rug or similar surface, or over a radiator or heat register.
• Place the unit on a stable surface able to support its size and weight.
ACCESSORIESAND CLEANING
Donot use accessories with this equipment unless recommended byyour cable service provider. Do not openthe cover of the unit.
Unplugthe unit and clean it with a damp cloth. Do not use a liquidor aerosol cleaner, or a magnetic/staticcleaning device.
OBJECTAND LIQUID ENTRY
Donot expose the unit to moisture, or spill liquids on or near it. Do not place the unit on a wet surface. Never push objects of any kind
intothe unit’s openings, as they may touch dangerous voltage points or cause short-circuits that could result in a fire or electric shock.
POWERSOURCES
Alabel on the unit indicates the correct power source for this equipment. Operate the unit only from an electrical outlet that has
thevoltage and frequency indicated on the label. Do not overload electrical outlets or extension cords, as this can result in a risk
offire or electric shock.
POWERCORD PROTECTION
Arrangeall power cords so that people cannot walk on the cords or place objects on or against the cords, as this may damage them.
Payparticular attention to cords that are at plugs, at electrical outlets, connected to accessories,and at the places where the cords
exitthe unit.
GROUNDING
Theterminal has a two-prong plug. Properly ground the unit by inserting the plug into a grounded electrical, two-socket outlet.
Ifthe plug is polarized, it has one wide prong and one narrow prong. This plug fits only one way.
Caution!To prevent electric shock, match wide blade of plug to wide slot, then fully insert. If you are unable to insert this plug fully
intothe outlet, contact an electrician to replace your obsolete outlet.
SERVICING
Thisunit is covered by a one-year warranty. Openingthe case will void your warranty.Refer all servicing to a qualified Vidéotron
technician.Contact your cable service provider for instructions. Service should be referred to a Vidéotrontechnician when any
ofthe following occurs:
• There is damage to the power cord or plug.
• Liquid enters the unit, or there is exposure to rain or water.
• A heavy object falls on the unit, or you drop the unit or damage the cabinet.
• Operation is not normal (the instructions in this guide describe the proper operation).
• The unit exhibits a distinct change in performance.
IMPORTANT RULESFOR SAFE OPERATION
ExtendedWarranty
Forgreater peace of mind, Vidéotronoffers you the possibility of extending the warrantyfor an additional two years. Customers
whowant this extended warranty must apply for it within 30 days of the service activation date. Theunit purchased will then
becovered for a total of threeyears following the activation date (one year under the basic warranty+ two years under the
extendedwarranty) under the same terms and conditions as in the basic warranty.
4
IMPORTANT RULESFOR SAFE OPERATION