REMOTE CONTROLS
PROGRAMMING FOR ADVANCED FUNCTION
In the CBL mode, the M1 button can be programmed to act as a macro or favourite channel button. You can send out up to 10 commands with one button press.
1.Press the CBL button to select the CBL mode.
2.Press the M1 button and SELECT button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds.
3.Press up to 10 buttons you wish to store. The CBL device LED will blink once for each command entered.
4.Press the CH+ button to store the functions that were selected. The CBL device LED will blink twice to confirm the storage of functions.
LOW BATTERY WARNING
When the batteries are low and need to be replaced, the remote control LED will blink 2 times in sequence whenever a POWER button is pressed to turn on equipment.
MEMORY LOCK SYSTEM
This remote control is designed to retain programmed memory for 10 years, even after batteries are removed from the remote control.
WRITE YOUR DEVICE SET-UP CODES
TV __________________VCR __________________DVD __________________ AUX __________________
17
