110 Stratos LV/LV-T Technical Manual

2.18.6 General Statistical Information

The Stratos CRT-P’s statistics modes are always in operation and cannot be selected OFF.

The counters within the statistic features do not operate when a magnet is applied to the CRT-Ps

The counters within the statistic features are reset each time the Stratos CRT-Ps are permanently programmed.

Event counters are displayed as bar charts showing the event totals expressed as a percentage.

Histograms count how often events occur in different time or rate intervals (for example, how many events occurred in a 160 to 169 ppm range).

Trends represent a certain number of events at a fixed point in time (e.g., rates). The trends are plotted as points that are joined together by a curve. In the Stratos CRT-Ps, the trends of the three different channels are identified with different colors.

NOTE:

When a magnet is applied, Stratos CRT-Ps can only continue recording diagnostic data when in the “synchronous magnet mode or during the first 10 cycles of the “auto” magnet mode.

2.19 Interrogating and/or Starting Statistics

The recorded diagnostic data (saved data contents of the pacemaker) are always read (transmitted through interrogation) at the beginning of the follow-up and saved to the programmer. This allows relevant data to be displayed on the programmer at anytime.

All statistics can be reset with the “Clear Statistics” function and the “Transmit” function in the “Parameter” selection menu. The start time and duration are automatically saved for all statistics.