- 22 -
To set up a system command for an event, select the Command button. The following configuration page will be displayed.
The following is a description of the fields contained on this page:
• Event Displays the name of the event that is being configured.
• Command Enabled Select the checkbox to enable running a system command for this event.
• Delay The amount of time in seconds, after the event occurs, before the system command will
be executed. If the event is removed before the delay time is reached, the system
command will be cancelled.
• Command Path Add The path and system command to execute when the event is added.
• Optional Parameters Add Parameters to pass to the system command.
• Command Path Remove The path and system command to execute when the event is removed.
• Optional Parameters Remove Parameters to pass to the system command.