Mitsubishi Electronics CP900E See page, 5SET BUTTON, PRINT BUTTON, BMENU BUTTON, 6STOP BUTTONS, 8PRINT BUTTON, CCLEAR BUTTONS, EMEMORY BUTTON, 9PROGRAM BUTTON, 3DISPLAY BUTTON

FEATURES & FUNCTIONS

REMOTE CONTROL UNIT

1 2

5SET BUTTON

DISPLAY

COLOR FIELD

PROG. ADJUST /FRAME

Q' ty

MENUSET

CLEARSTOP

MONITOR	MEMORY
	PAGE

MEMORY PRINT

Press to go to SAVE PRG. Repress to memorize the values and exit the MENU mode. See page 34-35.

6STOP BUTTONS

Press to cancel the printing process and start mechanical initializing. When pressing these buttons during displaying MAIN MENU, SERVICE MENU will be displayed.

7MEMORY PAGE BUTTON

Use to select the image memorized . The memory page is switched every time this button is pressed. The selected memory page mark illuminates.

8PRINT BUTTON

Press to print the image memorized by the MEMORY button.9PROGRAM BUTTON

1COLOR ADJUST BUTTONPress to display the COLOR ADJUST menu. See page 40.2FIELD/FRAME BUTTON

Press to switch FRAME and FIELD mode of input signals. The selected mode is displayed on the monitor screen and LCD. FRAME is good for high quality printing of still images, and FIELD is good for printing fast movement images.

See page 22.3DISPLAY BUTTON

Press to display the set condition on the monitor screen. Press again to switch off the display.

4PRINT QUANTITY {, } BUTTONS

Use to set the number of copies to be printed. The set number of copies is displayed on the monitor and on the front LCD. Press { to increase the number and } to decrease the number.

When pressing {or }button during printing, the counter becomes “1” and continuous printing is cancelled. It also cancels the reserved printing. See page 27.

Press the PRG. button to select between 3 types of user presets. Functions previously set with the MENU can be stored into 1 of 3 memories and recalled. Programs cannot be changed during printing. It may take longer to change the program.

A{, }, [, ] BUTTONS

Use to set the MENU display. Values are increased/ decreased and the cursor position is changed with these four buttons. These buttons are also used to select one of memorized images. See page 38 and 45.

BMENU BUTTONPress to display MAIN MENU used for various settings. See pages 34-35.CCLEAR BUTTONSPress to eliminate all or a part of memorized images.DMONITOR BUTTON

Press to switch the image of the input signal and the memorized image being displayed.

EMEMORY BUTTON

Use to memorize the image to be printed. The memorized image is displayed on the monitor screen for one second, then the image of the input signal is displayed.