MEM&PRN(Memory and Print)
| When pressing MEMORY button, the image is automatically printed |
| after the image is stored in the memory. In case of multi image of |
| different scenes, printing will be done after the last image is stored in |
| memory. |
OFF | MEMORY button functions individually. The image is memorized |
| without printing. |
ON | Automatically prints after memorizing. |
R1 | When a signal inputted through a memory key (pin No.2) of the |
| remote terminal on the rear panel is switched to “low” level from |
| “high” for the first time, a memory image is displayed. Then at the |
| second time, a source image is displayed without printing the |
| memory image. |
R2 | On the KEEP MONI OFF status, when a signal inputted through a |
| memory key (pin No.2) of the remote terminal is switched to “low” |
| level from “high” for the first time, a memory image is displayed. |
| Then at the second time, a source image is displayed and the |
| memory image is printed. |
| Do not change MULTI setting after memorizing an image. |
MEM&STOP(Memory and Stop) | |
OFF | The next image is overlaid in the memory. |
PART | The next image can not be overlaid in the memory when all parts of a page |
| become full. To overlay a new image, print the memorized image. |
PAGE | The next image can not be overlaid in the memory when all pages |
| become full. To overlay a new image, print the memorized image. |
MEM&MONI(Memory and Monitor) | |
| Switches the monitor display between the source image and memory |
| image after memorizing. |
OFF | Displays the source image. |
ON | Displays the memory image.(Initial setting) |
•When KEEP MONI is set to OFF, the source image will be displayed when starting printing.
Selects the image displayed on the monitor during printing. Displays the source image after starting printing.
Displays the source image after starting printing, when indicating it before printing. Displays the memory image after starting printing, when indicating it before printing.
The printed memory image is not cleared.
When MULTI is set to ON, the memory image is cleared after memorizing on the printed memory page again.
AFTER PRN The printed memory image is cleared after completing printing.
•For continuous printing, the stored image are cleared by above settings after completing printing the setting numbers of print.
CLEAR KEY |
|
PART | Pressing CLEAR button on the remote control unit, the selected |
| one MULTI image is cleared. |
PAGE | Pressing CLEAR button on the remote control unit, images of the |
| memorized page being selected are cleared. |
ALL | Pressing CLEAR button on the remote control unit, all of the stored |
| images are cleared. |
R1
Display Source | Memory | source |
Remote terminal input
Memorizing | Not printing |
R2 (When KEEP MONI :OFF)
Display source | Memory | source |
Remote terminal input
Memorizing Printing
MEM&MONI : OFF
About 2 seconds
Display SOURCE MEMORY SOURCE
MEMORY
MEM&MONI : ON
KEEP MONI : OFF
Display SOURCE MEMORY SOURCE
MEMORY PRINT
MEM&MONI : ON
KEEP MONI : ON
|
|
|
Display SOURCE | MEMORY | |
|
|
|
MEMORY PRINT
PRECAUTIONS | |
FEATURES | |
| |
CONNECTIONS | |
PREPARATION | |
PRINTING | |
| |
ADJUSTMENTS | |
SHOOTING | TROUBLE- |
|
|
| OTHERS |
|
|
51