CONNECTIONS

4 Press button. ]

RS232C menu is displayed.

Set “BAUD RATE” on this menu.

5 Press or button{ to }select “BAUD RATE”.

The setting BAUD RATE (e.g. 1200) will be displayed.

6 Press

or

button[ to ]select “1200”, “2400”, “4800”
or “9600” (bit/s).
7 Press

or

button{ to }select “COMMAND TYPE”.

8 Press

or

button[ to ]select “a” , “b” or “c” .

Select “a” for normal setting. Depending on the connected equipment, select “b” or “c”.

9Press SET button.

SERVICE MENU is displayed. “SAVE” is indicated.

APress or button[to memorize]the setting in “prg.1”,
“prg.2” or “prg.3.”

 

Select “CANCEL” to cancel the setting.

BPress SET button.

The source image (input signal from the equipment) is displayed.

The setting of BAUD RATE and COMMAND TYPE is completed.CSet the communication format of the computer with acomputer connected.

Synchronizing system

: Asynchronous communication

Data bit length

: 8 bits

Parity bit

: Nothing

Stop bit length

: 1

Transmission order

: Sent from LSB

Baud rate (bit/sec.)

: 1200, 2400, 4800, 9600

16