ADJUSTMENTS & SETTINGS (MAIN MENU)

5Repeat steps 2 to 4 to complete a comment.

•Skip 2 if you do not change the cursor position.

•Only one comment can be stored regardless of the program number you chose in SAVE PRG. Same comment will be stored in PRG.1 through PRG3. Different comments cannot be stored in each program.

•When printing in FIELD mode, the comment is a little lower in quality.

MEMORY POSITION Memory and Position setting display

•The print area settings made with this menu can be memorized as a user program setting.

LINE

Selects whether showing a frame of print area or not.

OFF

A frame of print area is not shown.

ON

A frame of print area is shown.

•When LINE is set to “ON”, the monitor colour may be changed, or the image may become unstable horizontally, depending on the H-POSI setting. In this case, set LINE to “OFF”.

•When the frame becomes over the setting area, the frame colour turns black.

•The frame is not displayed on the memory image.

H-POSI

Changes the horizontal start position of input signal

 

The whole data image can be moved horizontally by changing the

 

setting number.

 

 

Setting area

-8 ~ +8

•When setting minus value too large, the right side of the memory image is clipped on the monitor. However, it is printed normally.

V-POSI

Changes the vertical start position of input signal

 

The whole data image can be moved vertically by changing the setting

 

number.

 

 

Setting area

-10 ~ 0

H-START(H-Position)

Sets H-Position to special signal timing. Select “FRONT” when the image is unbalanced and cannot be corrected by H-POSI on basic printing. When selecting FRONT, AFC in SERVICE MENU does not work and the top part of the printing image may curved during VTR special play back.

NOR(Normal) When inputting PAL input signal

FRONT When inputting special input signal

MEMORY POSITION

LINEOFF/ON

H-POSI0

V-POSI0

H-START NOR/FRONT

LINE

H-POSI +

V-POSI +

44