Mitsubishi Electronics CP900E off, E Press, F Press, GPress SET button, IPress SET button, button{ to }select “RGB SOG ”, button[ to ]select “on” or “off”

E Press	or	button{ to }select “RGB SOG ”.
F Press	or	button[ to ]select “on” or “off”.

You can select whether Sync. ON Green signal is added to the output signal or not. When “on” is selected, Sync. ON Green signal is output and when “off” is selected, only Green signal is output. Select “on” or “off” according to the monitor to be connected.

off	Only Green signal is output.
on	Sync. On Green signal is output.

GPress SET button.

SERVICE MENU is displayed and “SAVE” is indicated.

H Press or button[ to memorize] the setting in prg.1, 2, or 3. Select “CANCEL” to cancel the setting.

IPress SET button.

The source image (input signal from the equipment) is displayed.

The setting of the sync. polarity and signal is completed.

CONNECTION WITH VIDEO OR S-VIDEO SIGNAL EQUIPMENT

Make sure to turn off the power before setting.

			To VIDEO IN terminal
			VIDEO (		)
	REMOTE	RS-232C	S-VIDEO IN	S-VIDEO OUT
			RGB
		75Ω	/HIGH		IN
		75Ω
		VIDEOHIGH
			R G/G+SYNC B	Y/SYNC
			IMPEDANCE
		75Ω	/HIGH		OUT
		75Ω
		HIGH
			SYNC
				AC LINE
S
				POWER
				ON	OFF
	To VIDEO OUT		75Ω /HIGH 75Ω HIGH
			75Ω	75Ω	75Ω
			HIGH	HIGH HIGH
VIDEO signal	terminal	VCP
equipment

To S-VIDEO IN terminal

S-VIDEO ( )

REMOTE	RS-232C	S-VIDEO IN	S-VIDEO OUT	S-VIDEO signal equipment
		RGB
	75Ω	/HIGH	IN
	75Ω
	VIDEOHIGH
		R G/G+SYNC B	Y/SYNC
		IMPEDANCE
	75Ω	/HIGH	OUT
	75Ω
	HIGH
		SYNC
			AC LINE
			POWER
			ON OFF
		75Ω /HIGH 75Ω HIGH
		75Ω	75Ω 75Ω	VCP
		HIGH	HIGH HIGH

To S-VIDEO terminal

PRECAUTIONS
FEATURES
CONNECTIONS
PREPARATION
PRINTING
ADJUSTMENTS
SHOOTING	TROUBLE-
	OTHERS

13