Mitsubishi Electronics CP900E OFF, OFF, OFF, PRN, B&P, OFF, OFF, OFF, OFF, PART, PAGE, NOTE, 0 ~20, BUZZER, THERMAL, INCREMENT, ERROR SCREEN, REMAIN NOTICE, AUTO FEED&CUT, REMAINING Q’ty

ADJUSTMENTS & SETTINGS (SERVICE MENU)

SYSTEM SETUP System setting display

INCREMENT
OFF	Page increment is not available.
PART	Every time pressing MEMORY button, memory part goes to the
	next part and image will be memorized on it. The memory page
	does not go to the next. When MULTI:OFF, this mode works and
PAGE	same as PAGE mode.
PAGE	Every time pressing MEMORY button, memory page goes to the
	next page and image will be memorized on it.
BUZZER	Selects the buzzer sound when pressing the buttons on the VCP
OFF	and remote control unit.
OFF	Does not sound the buzzer.
T1	Sounds the buzzer (Tone1).
T2	Sounds the buzzer (Tone2).
REMAINING Q’ty Sets the number of ink sheet to inform the remaining.
0 ~20	Informs by setting of REMAIN NOTICE when 0 to 20 ink sheet are
	left.
REMAIN NOTICE	Selects the way to inform when the number of ink sheet is less
OFF	than the set number in REMAINING Q’ty.
OFF	Does not inform the remaining.
BZ	The buzzer sounds three times when turning on the power,
	completing printing and closing the door. If the door is open when
PRN	turning on the power, the buzzer sounds when closing the door.
PRN	Informs by printing a red mark under the comment area on the
B&P	print.
B&P	The buzzer sounds three times and a red mark is printed under
	the comment area on the print.

•When selecting SELECT : B&W in COLOR ADJ, the red mark is printed in black- and-white.

REMAINING SCREEN		Selects displaying the remains of ink sheet on the monitor
OFF	or not.
	Does not display the remains of ink sheet on the monitor.
ON	Displays the remains of ink sheet on the monitor.

•If a paper jam occurs, the remains of the ink sheet may be different from the indication on the monitor.

NOTE

When THERMAL is set to ON, REMAINING Q’ty, REMAIN NOTICE and REMAINING

SCREEN are not displayed.

ERROR SCREEN	Selects displaying the error on the monitor.
OFF	When DISPLAY off is selected, the error is not displayed on the
ON	montor.
ON	Even if DISPLAY off is selected, the error is displayed on the
	montor.
AUTO FEED&CUT	Selects automatically feeding and cutting the print paper or not.
OFF	Does not feed and cut the print paper.
ON	When power is on and setting the print paper, this unit
	automatically feeds and cuts it twice after closing the front door.

•Only OFF is displayed when selecting THERMAL : ON.

THERMAL	Selects the type of printing paper.
OFF	Colour print paper.
ON	Monochrome thermal paper.

•The image may not be printed correctly depending on the set of actual paper type, installation of ink sheet and condition of selecting menu. (Refer to the next page.)

•When using thermal paper, do not install the ink cassette.

SYSTEM SETUP
INCREMENT		OFF/PART/PAGE
BUZZER			OFF/T1/T2
REMAINING Q'ty			10
REMAIN NOTICE		OFF/BZ/PRN/B&P
REMAINING SCREEN			OFF/ON
ERROR SCREEN			OFF/ON
AUTO FEED&CUT			OFF/ON
THERMAL			OFF/ON
PAPER HOLD			OFF/ON
INIT PROG	ALL/MAIN/SERVICE
INITIALIZE			OFF/GO[SET]