FEATURES & FUNCTIONS

FRONT PANEL

1

2

345

6 7 8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

9

A

B

C

1POWER BUTTON(INDICATOR)

Press to turn on power. Press again to turn off power. When the power is turned on, the indicator illuminates.

2LCD (LIQUID CRYSTAL DISPLAY)

Indicates input signal settings and various function modes and settings. Use Menu on the monitor or LCD for setting functions. See pages 36 - 37.

3MENU BUTTONPress for colour adjustment. The item will be switched in order of ;SELECT COLOR/B&W→ BRT→ CONT→ R-SUB→G-SUB

→B-SUB→CENTER[+]→ CANCEL[+]→ SET[+]→ SELECT COLOR/B&W. (When selecting B&W, R-SUB, G-SUB, B- SUB change to Y-SUB, M-SUB, C-SUB.)

To go back to the normal screen, press 5PLUS(+) button while SET[+] is selected. The above menu is displayed on the monitor screen. See page 40.

4MINUS(-) BUTTON

Press to decrease the value of each setting item. To set the value, select SET[+] with 3MENU button and press 5PLUS(+) button.

5PLUS(+) BUTTON

Press to increase the value of each setting item. To set the value, select SET[+] with 3MENU button and press this button.

6MONITOR BUTTON

Switches the display on the monitor. When this button is pressed, the picture on the monitor screen switches between the picture of the input signal (source image) and the memorized image.

When pressing MEMORY button while holding this button, print paper will be fed and cut automatically, and the mechanism will be initialized. Make sure to press MONITOR button first, or a new image will be memorized.

7MEMORY BUTTON

Press to memorize the image to be printed. When signal is not inputted, memory is not available.

8PRINT BUTTON

Press to print the image memorized by the MEMORY button. The image on the monitor screen switches to Source image when printing starts. When image is not memorized, printing is not available.

9PRINT OUTLETThe printed paper comes out here.Do not put any objects in front of the outlet.AOPEN BUTTON

Press to slide out the printing mechanism. Make sure to unlock DPRINTING UNIT LOCK SWITCH. When it is not working, turn off the power once. Then try to press this button again.

Open the mechanism to load paper and ink cassette or to clear a paper jam.BTRAY

Holds the printed paper which was come out from the print outlet. Press down the knob to pull the tray. Make sure to pull it out before using this unit.

CREMOTE TERMINALConnects the remote control unit supplied.DPRINTING UNIT LOCK SWITCHLocks the printing unit.

Shift the switch to the left (LOCK side) to lock and to the right (UNLOCK side) to unlock.

This unit is locked when shipping. When transporting this unit, make sure to lock the unit.

8