Mitsubishi Electronics CP900E ANA, DIG, OFF, EXT, INT, TTL, OFF, OFF, AUTO, USER, NEGA, POSI, CONVERT, LIVE SEL, OUT SYNC, OUT SYNC, OUT SYNC, KEY LOCK, MONI R-SUB, MONI B-SUB

ADJUSTMENTS & SETTINGS (SERVICE MENU)

OUTPUT Output signal setting display

MONI R-SUB	Adjusts red-subcontrast on the monitor. Red is added with			and	]	OUTPUT
						MONI R-SUB	0
	blue is added with .		[			MONI B-SUB	0
						LIVE SEL	ANA/DIG
						CONVERT	OFF/ON
MONI B-SUB	Adjusts blue-subcontrast on the monitor. Blue is added with			and		MEMORY SYNC	EXT/INT
					] OUT SYNC		AUTO/USER
	yellow is added with .		[			<OUT SYNC	0.3V/TTL>
						<OUT SYNC	NEGA/POSI>
						< RGB SOG OUT	OFF/ON>
LIVE SEL(Live select)		Switches the monitor display routes of input signal at LIVE
	mode with DISPLAY OFF. Selects to display input signal, or the
	reflection of image and adjustment on the monitor.
ANA(Analog)	Displays the image of input signal on the monitor.
DIG(Digital)	Displays the reflection of image and adjustment.
CONVERT	This function is to output the signals which selected at INPUT
	in MAIN MENU to Video output terminal/RGB output terminal/
	S-video output terminal.
OFF	Outputs to the same output terminal as the input terminal.
ON	Outputs to Video output terminal/RGB output terminal/S-video
	output terminal.
MEMORY SYNC	Selects the Sync. signal for displaying memory image.
EXT	Selects Sync.output signal, and displays memory image.
INT	Selects Sync.input signal, and displays memory image.

•Selecting Sync.output signal may not display memory image correctly depending on the connection. In this case, set SYNC. to “INT”.

•When selecting INT and displaying memory image, comment is not displayed.

OUT SYNC	Selects depending on the output of Sync signal.
AUTO	Selects the same signal as the one selected in IN SYNC.
USER	Selects by user.
OUT SYNC	Selects the output level of H+V Sync signal of RGB signal.
0.3V	0.3 Vp-p
TTL	TTL level
OUT SYNC	Selects the polarity of H+V Sync. output signal of RGB signal.
	Set the polarity according to the monitor connected.
	See the operation manual of the monitor for the polarity.
NEGA	Negative polarity
POSI	Positive polarity
RGB SOG OUT	Selects the sync.signal output from RGB analog output
	terminal on the rear panel.
OFF	Outputs Composite sync. signal only.
ON	Outputs Sync. On Green signal.

KEY SET Button function setting display

KEY LOCK	Makes the function on the remote control unit buttons invalid.
OFF	All buttons on the remote control unit are available.
ON	The function on the remote control unit buttons, except MEMORY,
	PRINT, MONITOR and MEMORY PAGE are not available. When
	pressing MENU button, KEY SET menu is displayed. When
	pressing MENU button, only selecting OFF/ON of KEY LOCK is
	available.

KEY SET
KEY LOCK	OFF/ON
MEM&PRN	OFF/ON/R1/R2
MEM&STOP	OFF/PART/PAGE
MEM&MONI	OFF/ON
KEEP MONI	OFF/ON
AUTO CLEAR	OFF/MEM/AFTER PRN
CLEAR KEY	PART/PAGE/ALL

50