Mitsubishi Electronics CP900E OFF, OFF, B&W, BRT, NOTE, INPUT, COLOR, R-SUB, G-SUB, B-SUB, COLOR, is ON, CENTER, CANCEL, SEPARATE, cut when, (EXAMPLE), Hi/Mid/Low, MARGIN CUT, BRT(Bright)

ADJUSTMENTS & SETTINGS (SERVICE MENU)

Hi/Mid/Low	Adjusts the colour depth of image by selected point.
POINT(Hi/Mid/Low)	Selects the point to adjust the colour depth.
(EXAMPLE)	Pointing lighter colour much lighter;
	Set the setting level for POINT(Hi) and Hi higher.

NOTE

It takes time to set the gamma value by CPU. Wait until the normal display is shown after pressing SET button.

It may also take time to switch the program when the value of gamma setting is changed.

LAYOUT2 Layout setting display 2

PRN V AREA Adjusts the vertical position of memory image.Setting area -10 ~ 10 (adjusts 2 lines each)•This menu is displayed only when IMAGES is set for 2 in L size paper.

•PRN V AREA permits adjustment of the vertical position of the image so that the clipped part of the image can be moved higher and lower.

SEPARATE	Selects whether a white frame is added to each print or not.
OFF	Prints without white frame. (A white frame appears according to
	the settings of LAYOUT)
ON	Prints with white frame.

MARGIN CUT Cuts the margin of the printed paper.

•This function is very convenient to stick the printed image on the card. The figure

shows S size	print paper setting.
OFF	Margin is not cut.
ON	Margin is cut.

•Only OFF is displayed when selecting THERMAL : ON.

ANALOG COLOR ADJ Analog colour adjustment display

•This menu is used to adjust the image of analog input signal before storing in the memory.

INPUT	Selects processing of video signal.
COLOR	Processes as colour video signal.
B&W	Processes as monochrome video signal. (The image is shown in
	black and white.)	Select B&W when inputting monochrome signal.
BRT(Bright)	Adjusts the brightness of the printing image.
CONT(Contrast)	Adjusts the contrast of the printing image.
R-SUB	Adjusts red-subcontrast of the printing image. Red is added with
	and blue is]added with .		[
G-SUB	Adjusts green-subcontrast of the printing image. Green is added
	with and pink is]added with .		[
B-SUB	Adjusts blue-subcontrast of the printing image. Blue is added with
	and yellow]is added with .		[
COLOR	Adjusts density of the printing image. The colour of the image gets
	deeper with and lighter]with .		[
APT(Aperture)	Adjusts the contour of image. The contour is reinforced with and
	softened with .	[
CENTER	Initializes each setting. When pressing		, the values]of BRT,
	CONT, R-SUB, G-SUB, B-SUB,COLOR, and APT will be reset to the
	centre value.
CANCEL	Initializes each setting in ANALOG COLOR ADJ.

LAYOUT2

PRN V AREA (L2 ONLY) 0(-10~10)

SEPARATEOFF/ON

MARGIN CUT

OFF/ON

Gray part iscut whenMARGIN CUTis ON.

ANALOG COLOR ADJ
INPUT	COLOR/B&W
BRT	0
CONT	0	C	R
R-SUB	0	C	R
G-SUB	0	M	G
B-SUB	0	Y	B
COLOR	0
APT	0
CENTER
CANCEL

]