1.1Pre-Operation Information
OUTLINE
1.1.1 Precautions for operation
Incorrect handling might cause the inverter to operate improperly, its life to be reduced considerably, or at the worst, the inverter to be damaged. Handle the inverter properly in accordance with the information in each section as well as the precautions and instructions of this manual to use it correctly.
This manual is written for the
For handling information on the parameter unit
(1) Unpacking and product check
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that the product agrees with your order and the inverter is intact
1) Inverter type
SERIAL:XXXXXXXXXXX
Serial number
Serial plate
Inverter type Input rating output rating
Rating plate
Rating plate
MITSUBISHIINVERTER
MODEL
INPUT XXXXX
OUTPUT XXXXX
WEIGHT | 75kg |
MITSUBISHI ELECTRIC CORPORATION MADE IN JAPAN
FR - |
| A540L | - |
| 530K | - |
|
| |||||
|
|
|
|
|
|
|
|
|
| ||||
| Symbol |
| Voltage Class |
|
| Symbol |
| Applicable Motor Capacity | |||||
|
|
|
|
|
|
|
|
| |||||
| A540L |
| 400V class |
|
| 530K | Indicates capacity in “kW” | ||||||
2)Accessory Instruction manual
Symbol | Specifications |
|
|
NA | U.S. specifications |
|
|
If you have found any discrepancy, damage, etc., please contact your sales representative.
(2) Preparations of instruments and parts required for operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare equipment and parts as necessary.
(3) Installation
To operate the inverter with high performance for a long time, install the inverter in a proper place, in a correct direction, and with proper clearances.
(4) Wiring
Connect the power supply, motor and operation signals (control signals) to the terminal block. Note that incorrect connection may damage the inverter and peripheral devices. (See page 8.)
1
