Mitsubishi Electronics MIM-A01 manual MIM and Mitsubishi MELSEC FX, MIM-G01 and FX Messenger

Configuration MIM and Mitsubishi MELSEC FX

6.2MIM and Mitsubishi MELSEC FX

The modem may be operated along with MELSEC FX in two ways: As GSM modem for "FX Messenger" or as modem for FX remote access.

6.2.1MIM-G01 and FX Messenger

In order to connect the MIM-G01 to a FX1S Messenger, the modem must be initialized with the following init string, which sets the handshake mode (no handshake will be executed) and the transmission speed (19200 bps).

MIM-G01

AT+IFC=0,0;+IPR=19200;&W

The modem is to be connected to the RS232-BD of the FX Messenger via standard RS232 cable. Detailed information on configuring the FX messenger is to be found in the FX Messenger Manual.

6.2.2MIM for FX Remote Access

Detailed information on correct modem selection and the necessary parameters are to be found within the Mitsubishi Manuals at http://www.mitsubishi-automation.com

GX IEC Developer – Reference Manua	Art. No. 043596
FX Communications User Manual	Art. No. 070143
GX Developer – Operating Manual	Art. No. 160262

When using FX along with MIM-G01, we do recommend this init string:

AT+WRST=1,"024:03";+IPR=9600;+IFC=0,0;+ICF=5,1;E1V1Q1S0=2&W

The init string recommended for using the FX along with the MIM-A01, is as follows:

AT%C0"H0E0Q1V1S0=2&D0+K0&W+TFORMAT="7E1";+TBAOD="9600"

6.3Connection to other Mitsubishi Products

The Industrie-Modems may be used along with the A and Q series of Mitsubishi PLCs, as well as for accessing E-Terminals.

Detailed information on correct modem selection and the necessary parameters are to be found within the Mitsubishi Manuals at http://www.mitsubishi-automation.comas well as well as in the E-Terminal manuals at http://www.e-terminals.com.

Mitsubishi Industrial Modem 6 - 5