Appendix | AT Commands |
|
|
8.2.7Modem Commands
AT+T Answer - Setting the Response Behaviour
AT+T Answer="OnOff"
Switches the modem’s call answering on or off. This is necessary to receive messages.
OnOff:
On | Call answering on (default) |
Off | Call answering off |
Example: |
|
Switch off the call answering
AT+T Answer="Off"
Modem reply:
OK
AT+T Answer?
Displays the active answer setting.AT+T Answer?
Modem reply:
+T Answer: "On"
OK
AT+T Time - Setting the System Time
AT+T Time="time"
Sets the system time for the modem which is used for internal time stamp, date fields for SMTP mes- sages and fax headers. The internal system time must be set for all modems:
-after initial connection
-after time changes (normal/summer time)
-when using in other countries/time zones
-after disconnecting from power supply, or power loss
Check the time from the controlling application as needed and set, if necessary.
Zeit: Format of the system time to be set:
YYY/MM/DD, hh:mm:ss, time zone
YYYY:year (1980....2036)
MM:month (01...12)
DD:day (01..31)
hh:hour (00..23)
mm:minute (00...59)
ss:second (00...59)
Time | Time zone in which the modem is located. |
zone: | The value gives the difference from GMT |
| with this syntax: |
Example:
The system time of the modem is set at 24.1.2003, 12:16:00 CET:
AT+T Time="2003/01/24, 12:16:00, +0100"
Modem reply:
OK
Mitsubishi Industrial Modem | 8 - 21 |