AT Commands | Appendix |
|
|
AT+T Read - Reading a Stored Message
AT+T Read=Number..
Lists the message with the indicated ID from the memory of the modem.
The message is not deleted and can be read as often as you want.
Number:Number of the message to be read. This number can be determined using the List command. To read the first stored message (that is the oldest), enter a 0 (zero).
Response:
Short response (AT+T Verbose="Off"):
+T Read= number, type, time *message
OK
Comprehensive response (AT+T Verbose="On"):
+T Read: Number, type, time “ParameterList”
*message
OK
Message: | Text of the message. |
| Each text line of the stored message begins with * |
ParameterList: | Additional Parameters - depending on message type. |
Number: | Number of the message to be read. |
Type: | SMS, Express |
Time: | Time stamp of the message |
| is set after successful receipt from the Tixi AT Modem. |
Example: |
|
An SMS message with the number 11 is read out:
AT+T Read = 11
Modem reply:
+T Read: 11, SMS, 2001/10/07,12:05:55 “From:071346768422; TimeStamp:2001/10/07,12:05:37" *That is a message from Hans!
OK
8 - 20 | MITSUBISHI ELECTRIC |
