Appendix |
|
| AT Commands | |
|
| |||
AT+T Mode - Activating Modem Mode or Message Mode | ||||
|
|
|
| |
| AT+T Mode="Mode" |
|
| |
| Sets the operating mode of the modem. |
| ||
| ModemMode: |
| The modem works like a “normal” modem. | |
|
|
| The standard Hayes AT commands are applicable. | |
|
|
| The Message Mode commands are not applicable. | |
|
|
| The red Modem Mode LED lights up. | |
| MessageMode: |
| The automatic functions of the Tixi AT Modem are activated and | |
|
|
| effective.This mode must be activated, | |
|
|
| otherwise the message commands described here may not be | |
|
|
| used! |
|
|
|
| The standard Hayes AT commands are not applicable. | |
|
|
| The Modem Mode LED is switched off. | |
| Mode: |
| ModemMode | (default) |
|
|
| MessageMode |
|
| Example: |
|
|
|
| AT+T Mode="MessageMode" | activates Message Mode. | ||
| Modem reply: OK (the Modem Mode LED turns off) |
| ||
| Use also: | AT+T Mode? | shows the current mode | |
| and | AT+T Mode=? | shows the possible modes | |
|
|
|
|
|
AT+T Help - Showing a Command Overview
AT+T Help
Gives an overview of the instruction set of the Mitsubishi Super Modem.
In this way you can access the most important information at any time when working with the Tixi modem even when the manual is not available
AT+T Erase - Resetting the Modem
AT+T Erase
Use this command to reset the modem. The modem is reset, all
AT+T Redial
AT+T Redial
Sets the number of automatic redial attempts.
Redials | ...0 | 9 | (default=0) |
|
|
|
|
Example:
AT+T Redial="3"
Modem reply: OK
AT+T Redial?
Displays the configured number of automatic redials.
AT+T Redial?
Modem reply:
+T Redial:"3"
OK
Mitsubishi Industrial Modem | 8 - 23 |