AT Commands | Appendix |
|
|
8.2.5AT+T Send - Sending SMS,
Setting General Message Parameters
AT+T Send="All;..."
AT+T Send="ALL; DialPrefix:nnn; ModemName:Name; ModemNumber:number End:char"
This command sets the parameters that are common to all types of messages; no message is sent.
No message text can be entered after this command!
nnn:Getting an Outside Line Prefix
If you are using the modem on a system where a prefix is needed to get an outside line, en- ter it here. Enter characters which can be dialled
If no prefix is needed to get an outside line, you can leave out this parameter.
Name: When sending fax messages, this name is used in the header of the fax sent and as sender ID when sending Express
A maximum of 16 alphanumeric characters is allowed.
Number: Number of the telephone line to which your Tixi modem is connected. This number must be entered in international format:
This number is used in the headers of fax messages and is listed as the sender for Express
Char: Defines the character that closes the message and starts sending. (default: <STRG>+<Z>)
Example:
Enter the external call prefix "0", the modem name "John Doe Inc, modem 2" and the telephone number
AT+T Send = "All; DialPrefix:0; ModemName: John Doe Inc, modem 2;
ModemNumber: +44-20-1234567"
Sending a Fax
AT+T Send="Fax;..."
AT+T Send="Fax; Dial: number" >SubjectText
>MessageText line#1 >MessageText line#n ><CTRL>+<Z>
This command sends a text message as fax or sets the parameters.
When you have closed the command line with <CR/LF>, the modem displays a prompt (>) where you can specify the subject line you want in your fax message. The message text is entered in sub- sequent lines. To close this message, press the keys <CTRL>+<Z>.
If you skip the message text, the parameters are saved for later use until replaced by new parameters.
Number: | The recipients fax number. |
| Enter characters which can be dialled |
SubjectText: | This is the first line of the message text. It forms the subject line |
| of the fax message. |
MessageText line#1...n: | Other lines of the message text. |
| Each line is entered at the prompt character displayed by the mo- |
| dem and closed by <CR/LF>. During sending the modem does |
| an automatic line break after 75 characters by itself. The messa- |
| ge text must not contain umlauts. |
Example: |
|
AT+T Send="Fax; Dial: 40578747" >Hello Paul
>This is the important message sent by fax.
>
>See you. ><CTRL>+<Z> Short modem reply:
OK
8 - 14 | MITSUBISHI ELECTRIC |