Mitsubishi Electronics MIM-A01, MIM-G01 manual Overview of S-Registers, Store Active Profile

AT Commands MIM-A01 Appendix

&W - Store Active Profile

This command causes the modem to store a subset of the active profile command and S-regis- ter configurations into the NVRAM user profile ‘n’.

&W0*	Store in user profile 0
&W1	Store in user profile 1

+VCID - Caller ID Settings

The +VCID=n command controls the reporting and presentation of data associated with the Cal- ler ID services.

+VCID0	don’t display CallerID
+VCID1	display CallerID

Additional and detailed information on AT commands are to be found within the Mitsubishi manuals at www.mitsubishi-automation.de.

8.2.3Overview of S-Registers

The modem holds S registers, which allow to check and store the active configuration. Some S-registers are stored in non-volatile memory (NVRAM), which can be interrogated with Z, &Y, and &W commands. The values of most S-registers can be modified using AT commands.

Register	Function	Default	Range
S0	No. of rings to auto-answer on	0	0–255
S1	Ring count	0	0–255
S2	Escape character	43	0–127
S3	Carriage Return Character	13	0–127
S4	Line feed character	10	0–127
S5	Backspace character	8	0–32, 127
S6	Wait before dialing	2	2–255
S7	Wait for carrier	60	0–100
S8	Pause time for dial modifier	2	0–255
S9	Carrier recovery time	6	1–255
S10	Lost carrier hang up delay	14	0–255
S12	Guard Time	50	0–255
S14	Bit-mapped options (echo, modem responses,	138	—
	tone/pulse dialing)
S21	Bit-mapped options (serial interface)	48	—
S22	Bit-mapped options (speaker, modem responses)	118	—
S23	Bit-mapped options (interface speed, parity, guard tone)	none	—
S25	Detect DTR change	5	0–255
S33	Sleep mode timer	0	0–90
S37	Maximum line speed attempted	0	0–35

Tab. 8-24:Overview of S-Registers

8 - 12 MITSUBISHI ELECTRIC