Mitsubishi Electronics MIM-A01, MIM-G01 manual Mounting, E Attention, P Danger, Mitsubishi Electric

Mounting Mounting and Installation

3.3Mounting

Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm).

027954 541034

Antenna

VDC ...40 10 +

-

Power	GSM
Status
Push

-Card SIM

Fig. 3-9:

Pull out the black tab on the device using a screwdriver and so the device can snap fit to the DIN rail. You can remove the device from the rail in the same way. Ensure that the retaining mechanism of the modem snaps cleanly and securely into the DIN rail.

Fig. 3-10:

Modem mounted on the DIN rail

E ATTENTION:

￿ The device must only be used in rooms that are dry and clean. Protect the devi- ce from humidity, water splashes or heat.

￿ Do not subject the device to severe vibration.

P DANGER:

￿ The device must not be used in environments containing flammable gases, fumes or dust.

3 - 10 MITSUBISHI ELECTRIC