AT Commands | Appendix |
|
|
Retrieving Internet E-Mail (POP3)
AT+T Send="POP3;..."
AT+T Send="POP3; Dial: Number;PPPUser: ISP user;PPPPassword:
>START
><CTRL>+<Z>
This command tests the specified mailbox (POP3) and starts retrieving email, if necessary. Each fully downloaded message is deleted from the POP3 server.
If
IMPORTANT! | Because this is a send command, a prompt also appears here after you enter the |
| command. To start retrieving |
| If you press ESC the parameters are saved but no POP3 query will be executed. |
|
|
Number: | Access number of the Internet service provider. |
| Enter characters which can be dialled |
ISP user: | PPP user name to dial into the Internet provider. |
PPP password. | |
Flag: | If you indicate “d”, the messages will not be deleted by the server after they are retrieved. |
Mailbox: | User name of the mailbox (POP3) for logging into the mail server. |
MailPW: | Mailbox password. |
POP3serve: | Host name or IP address of the POP3 mail server that holds the message, for exam- |
| ple, mail.example.com. |
Example: |
|
The mailbox Smith (password: John) is retrieved from the mail server mail.provider.com. For PPP login, the user name JSmith and password Petsname are used:
AT+T Send = “POP3; Dial: 2345678; PPPUser: JSmith; PPPPassword: Petsname; Username: Smith; Password: John;
POP3MailServer: mail.example.com”
>START
><CTRL>+<Z>
Modem reply:
OK
*DetectedMails: Number1 Number of messages detected in the mailbox
* DetectedSize: | Size1 | Size of detected messages |
* ReceivedMails: | Number2 | Number of received messages |
* ReceivedSize: | Size2 | Size of messages received |
Since the configuration parameters are only necessary when you first configuration and are optional after this, you can start continuous mail retrieval with the following short command:
AT+T Send = "POP3" ><CTRL>+<Z>
8 - 18 | MITSUBISHI ELECTRIC |
