Appendix C - Quick Commands and DTMF Functions
These DTMF Quick Commands can be dialed from a Local Extension or an outside
telephone at the Auto Attendant. To enter Command mode, dial 
at a Local Extension or at the Auto Attendant. If you are requested to enter a password, enter the Administrator password. Next, enter any command followed by the 
sign.
CommandAction
00 | TalkSwitch tells you the Unit ID of the unit you are |
| connected to. |
0x | Assign Unit ID 1 - 4 to TalkSwitch (x = 1 to 4) |
30 | TalkSwitch tells you which mode it is currently using |
3x | Switch Modes (x = 1or 2) |
4x | Record Auto Attendant (x = 1 to 9) |
04x | Erase Auto Attendant messages (x = 1 to 9) |
5x | Playback Auto Attendant messages (x = 1 to 9) |
61 - 64 | Record Auto Call Back Announced Messages 1 - 4 |
65 | Record Prompted Call Back Announced Message |
061 - 064 | Erase Call Back Announced Messages 1 |
065 | Erase Prompted Call Back Announced Message |
71 - 74 | Playback Auto Call Back Announced Messages 1 - 4 |
75 | Playback Prompted Call Back Announced Message |
90 | Set to Serial connection mode (default) |
91 | Set to USB connection mode |
2xx 8<phone number> Enter Remote ext. (2xx) phone number | |
2xx 980 0 | Enter Remote ext. (2xx) Turn off “Same Line Connect” |
2xx 980 1 | Enter Remote ext. (2xx) Turn on “Same Line Connect” |
2xx 9 <Hunt Group> | Enter Remote ext. (2xx) “Connect using:” Hunt Group |
| (Hunt Group = 9, |
1xx 61 | Enable ‘Do not Disturb’ at the Local Extension |
1xx 60 | Disable ‘Do not Disturb’ at the Local Extension |
Networked
Networked
Appendices
113
