First select a Line Hunt Group then name the group(s) if desired.

Under Set Line Hunt Group, select the lines you wish to add to the Hunt Group from the left column 'Lines available', then click the '>>' button to move it to the right column 'Lines to hunt'. Repeat this process for the other Hunt Groups. Lines will be hunted in the order they are listed from top to bottom.

If units are networked, you will notice the option ‘Hunt lines on same unit first’ is visible and checked by default. This feature helps optimize how

Networked

TalkSwitch uses lines for outgoing calls. It is recommended that you keep

 

 

this option engaged if you want to minimize ‘blocking’. Blocking can

 

occur if too many calls are placed across the LAN simultaneously.

 

TalkSwitch systems can support up to 6 calls simultaneously. The

 

likelihood of a call being blocked is very small for most people. In the

 

event the system is loaded with calls and an inbound call cannot be

 

directed across the LAN, the call will be handled according to the busy

 

call cascade settings.

2.3.1.3 Fax Information

The information in this tab helps configure TalkSwitch to handle faxes.

2.0

Configuring TalkSwitch

29

Page 33
Image 33
Talkswitch 48 user manual Fax Information