
Highlight the newest firmware file, then click the "Open" button.
The final stage of the update process will take approximately
When the update is complete, you will see a message indicating the update was successful.
Click the "OK" button and the TalkSwitch software will then close. There is no need to restart Windows or TalkSwitch - your updated TalkSwitch Firmware is now ready to go!
In the event the firmware update was unsuccessful, please try the update process again and follow the instructions. If you continue to have problems please contact your reseller or Centrepoint Technologies.
Firmware updates will not alter your system configuration. In the event of a major system update, it may be necessary for the configuration file to be reset to default values. In this case you will need to reconfigure the entire system. In the case of a major system update, Centrepoint Technologies will mention any issues involved with the firmware update.
Under no circumstances should you use mismatched software and firmware versions. The last two digits of the version number for the software and firmware should always match (ie. 1.37 software and 2.37 firmware). If you use mismatched software and firmware to configure your system, this could result in a system failure requiring system defaults to be reset and the system reconfigured.
If you replaced your computer with a new one, please use the software that matches the latest version of firmware running on TalkSwitch. If obtained from the website, you can once again download the install file. All install files found on the website have both the entire software program and the latest firmware. They are not simply upgrade files.
94
TalkSwitch User Manual