DTMF | Function performed | Notes |
|
|
|
| |
<flash>5 | Disconnects current caller and | Action performed after putting a caller on Hold | |
| reconnects immediately to the last | and dialing an intended destination. | |
| caller put on hold. |
|
|
|
|
| |
Call Parking Spaces - 10 in total for | Press 'flash' to place a call on hold, then assign | ||
| the entire system. | a parking space | |
|
|
|
|
Parked Call Retrieval | Direct dial | ||
|
| up a parked call. |
|
<flash>6 | Conference Call for 3 parties. |
Press 'flash' to put the first caller on hold, dial another extension or external number, then press 'flash' 6.
61 | Enables 'Do Not Disturb' at the | Direct Dial | 61 at a local extension. User will | |
hear confirmation. Reminder is played | ||||
| current extension | |||
| every time the extension is picked up. | |||
|
| |||
|
|
|
| |
60 | Disables 'Do Not Disturb' at the | Direct Dial | 60 at a local extension. User will | |
hear confirmation. | ||||
| current extension. | |||
|
|
| ||
|
|
| ||
7 + 1xx | Call Pick up - Extension Specific | Direct dial from dial tone to pick up a call | ||
|
|
| ||
ringing at another extension at anytime includ- ing after the Auto Attendant answers.
<flash>7 | Hold Retrieve - used for retrieving any |
| |
| calls placed on hold at that extension. |
Direct dial from dial tone or by pressing 'flash' then 7 to cycle through on a first in / first out basis.
80Accesses Same Line Connect when transferring an outside caller to another outside number.
Put the caller on Hold, dial 80, and then dial the outside number. Hang up to complete the transfer. Can only be used when the line has
Line Hunt Groups used to access a | |
| line. |
Direct dial from dial tone.
8 | Play music source through PA output | Direct dial from dial tone to toggle on or off | |||
music through the PA port. Useful for office | |||||
|
| ||||
|
| background music. | |||
|
|
|
| ||
9 | Call Pick up | Direct dial from dial tone to pick up a call | |||
|
| ringing at any other extension. | |||
|
|
|
|
| |
| Enters command mode | Direct dial | at a Local Extension | ||
If you have Direct Line Access enabled at your Local Extension, then you must first press ‘flash’ before using most of the functions listed.
Appendices 115
