Problem: I can’t use my Conference / 3-Way Calling feature from the phone company.

You need to make sure you have checked the box indicating that you have 3- Way Calling on the appropriate lines. This option is located on the Telephone Lines page in the ‘System Information’ folder of the configuration.

Problem: Unable to place intercom calls from a Local Extension.

You can not use a Local Extension that has been given 'Direct Access' to your telephone lines for intercom calling. To change this setting, go to the Local Extension configuration tab and make the necessary adjustment by giving access to a Line Hunt Group or dial Flash to get internal dial tone.

Answering and Fax Machines:

Problem: The answering machine and/or fax machine picks up calls before they can be answered by telephone extensions.

Check your settings in the Telephone Lines tab in the 'Call Handling' section in the Software Configuration. The problem may be that your fax machine/answering machine extension is set to answer calls at the same time as your telephone extensions. To fix this problem, click the “Adjust sequence” button and set the slider bars for your telephone extensions so that they will ring a few times before your fax/answering machine begins ringing.

Problem: Incoming faxes are not automatically detected and routed to the fax machine.

On the Auto Attendant tab of the configuration software, check to ensure that you have chosen the appropriate extension for the field labeled 'if a fax call is detected'.

Not all fax machines emit a CNG tone that TalkSwitch can detect and route. Therefore, it is wise to consider incorporating an additional method of fax routing. This may include the use of a distinctive ring number or giving the caller the option to select the fax extension.

On average, fax machines/modems will 'time out' or disconnect after 20 sec- onds if they have not connected with another fax machine/modem. If you are using the 'User does not make a selection' option to route incoming faxes, the fax call may 'time out' before it reaches your fax extension. If your Auto Attendant is lengthy, you may want to shorten it or use another fax routing option.

The level of the Auto Attendant is too loud and as a result is overpowering the CNG tone effecting detection. You may want to lower the volume level of the Auto Attendant.

104 TalkSwitch User Manual

Page 105
Image 105
Talkswitch 48 user manual Answering and Fax Machines