
Accepting the Call Back:
There are two ways to accept a Call Back from TalkSwitch.
1.Call Back is normally accepted by answering the call and pressing , then if required, entering your password. This option is used when you have a direct line to your Call Back telephone number.
2.The 'Use Announced message' option allows the Call Back from TalkSwitch to reach you even when you are staying at a hotel or are in an office where calls are intercepted by a receptionist or switchboard operator. When the Call Back is answered, TalkSwitch will begin playing your
forwarded to you, press , then enter your password on the telephone keypad to accept the Call Back. (If the Call Back is not accepted within the initial '2' minute period, TalkSwitch will disconnect the Call Back.) After you accept the call, you will hear the Auto Attendant, and you can now make your selection to check your voicemail, ring an extension, use Call Bridge, or enter command mode.
3.8Upgrading the TalkSwitch Firmware
We are continually looking for ways to enhance your communications capabilities. When new features are added, we want TalkSwitch users to have immediate access to the update.
The ease with which TalkSwitch's firmware program can be updated and the convenience of having updates readily available to users on our website, makes it possible for us to provide quick and easy TalkSwitch enhancements!
TalkSwitch’s firmware program (or the programming code that operates your TalkSwitch) is located on a 'Flash EPROM'. This means that the code operating your TalkSwitch can be 'updated' without removing the chip that contains the code. Because of this, you can easily update your TalkSwitch by disk or by visiting our website at www.talkswitch.com/support and downloading any new updates.
Step # 1
The first step is to select and download the proper update file from the Centrepoint Technologies website (www.talkswitch.com/support). The firmware and software will be integrated in one file.
92
TalkSwitch User Manual