LAN PORT | You can connect to an Ethernet hub using a Category 5 |
| cable with |
| configuration across the LAN. If you have 2 or more |
| TalkSwitch 48 units, you can ‘network’ them and they |
| will function as a single system. There are 3 LEDs next |
| to the LAN port. The top LED is on when a link has been |
| established with any TalkSwitch or PC running |
| TalkSwitch software. The 2nd LED is on when data is |
| being received and the 3rd LED is on when data is being |
| transmitted. |
E1 - E8 | Plug in any analog device that uses a standard |
| telephone jack, such as: telephones, fax machines, |
| internal or external PC modems, etc. TalkSwitch identi- |
| fies the extensions as 1x1 to 1x8. (x represents the unit |
| ID number assigned to that TalkSwitch unit). By default |
| all TalkSwitch units are shipped with a unit ID = 1. This |
| means the extensions are 111 to 118. If it had unit ID 2 |
| then they would be 121 to 128. For details on setting up |
| 2 or more units on a LAN to operate as ‘networked’ |
| units, please see section 1.5. |
L1/L2, L2, L3/L4, L4 | This is where you plug in your telephone lines |
| If you have 2 lines out of 1 phone jack, you can plug into |
| the 1/2 and 3/4 jacks. Use a surge protector if you live |
| in an area prone to lightning strikes. |
USB | Use the USB port if your PC supports USB connectivity. If |
| you use the USB port, you cannot use the serial port |
| simultaneously. Windows 2000/XP currently not |
| supported for USB connectivity. |
SERIAL | Attach the supplied serial cable (RS232) to connect |
| TalkSwitch to your PC. |
MEMORY SLOT | Memory expansion slot. Used to expand internal |
| memory for voicemail and Auto Attendant messages. |
| TalkSwitch Memory cards can be purchased from your |
| local TalkSwitch reseller. Simply place the memory card |
| in the slot and TalkSwitch will automatically detect and |
| start using the extra memory within 20 seconds. |
POWER | Plug the supplied AC Power Adapter in here. Rating: |
| 16VAC 1.1 A output. Do not use any other power adapter |
| as this may cause damage. |
1.0 | Installing TalkSwitch |
5
