S t o p B i t s
To change the setting, from the Main Menu select Setup, Port Settings, then User Comm. Then, follow these steps:
1.Press L or R until you see
USER COMM
l Stopbits r
2.Press E. You will see the current setting, for example:
STOPBITS
1r
3.Press L or R to display the number of stop bits you need, then press E. Press e three times to exit to the Main Menu.
P a r i t y
To change the setting, from the Main Menu select Setup, Port Settings, then User Comm. Then, follow these steps:
1.Press L or R until you see
USER COMM
l Parity r
2.Press E. You will see the current setting, for example:
PARITY
None r
3.Press L or R to display the parity you need, then press E. Press e three times to exit to the Main Menu.
Communication Values
